Operational Dashboards & KPI ReportingNovember 18, 20269 min read

Overtime Percentage Benchmarks for Manufacturing: Compare Like With Like

BLS reports manufacturing overtime in hours, not a target percentage. Compare the right workforce, calculate hours and wage shares, and build a plant baseline that holds up in a staffing review.

Editorial photograph: Use overtime percentage benchmarks for manufacturing to compare BLS figures, separate hours from wage costs, and check

Which overtime percentage should a manufacturing plant measure?

Track overtime hours as a share of total hours worked to assess capacity, and use a separately defined wage measure to assess cost. Dividing overtime by regular hours is valid too, but it answers a different question. Before anyone compares results, name what goes above and below the division line.

MetricCalculationWhat it measures
Overtime hours shareOvertime hours ÷ total hours worked × 100The portion of worked hours classified as overtime
Overtime-to-regular-hours ratioOvertime hours ÷ regular hours worked × 100Overtime relative to regular-hour capacity
Overtime wages shareAll wages for overtime hours ÷ total gross wages × 100The portion of wages paid for overtime work
Incremental overtime premium shareOvertime premium above straight-time pay ÷ total gross wages × 100The additional premium as a share of wages
Four different calculations. Multiply each ratio by 100 to express it as a percentage.

For these calculations, total gross wages includes regular wages and all overtime wages for the same employees and period, excluding benefits. If finance uses another payroll denominator, write it down. The label “overtime labor cost percentage” is not enough: it leaves readers guessing whether the calculation includes benefits, all overtime wages, or just the premium.

See how the denominator changes the result

Take a hypothetical department with 400 regular hours and 40 overtime hours. Everyone earns $20 per regular hour and $30 per overtime hour, with no other wage components in this example. That gives you 440 worked hours, $8,000 in regular wages, $1,200 in overtime wages, and $9,200 in total gross wages.

  • Overtime hours share: 40 ÷ 440 × 100 = 9.09%.
  • Overtime-to-regular-hours ratio: 40 ÷ 400 × 100 = 10.00%.
  • Overtime wages share: $1,200 ÷ $9,200 × 100 = 13.04%.
  • Incremental premium share: $400 ÷ $9,200 × 100 = 4.35%.

The premium is $400: 40 hours multiplied by the extra $10 per hour. It is not the full $1,200 paid for overtime work. These four percentages describe the same department, but swapping one for another changes the meaning of the report. First, reconcile worked hours without double-counting. Keep paid nonworking time out of any denominator labeled “hours worked.”

An overtime percentage without a denominator is not a usable benchmark.

What do published manufacturing overtime benchmarks actually show?

BLS reports that manufacturing production and nonsupervisory employees averaged 3.8 overtime hours per week in 2025. Among the industries shown below, observations ranged from 2.5 hours in machinery to 5.3 in transportation equipment. These annual figures are not seasonally adjusted. They describe working patterns, not recommended overtime percentages.

Manufacturing industryWeekly overtime hours
Manufacturing overall3.8
Durable goods3.7
Nondurable goods3.8
Machinery2.5
Computer and electronic products2.6
Transportation equipment5.3
2025 average weekly overtime hours. Population: production and nonsupervisory employees. Not seasonally adjusted. Source: BLS, The Economics Daily, 2026.

Start with your subsector, not the national headline. BLS's figures of 2.5 hours for machinery and 2.6 for computer and electronic products tell a different story from transportation equipment at 5.3. Pick the closest industry comparison before asking a plant manager to explain a gap. Otherwise, the meeting starts with the wrong reference point.

Do not turn the national 3.8-hour BLS observation into a percentage by assuming a workweek. Dividing it by an assumed 40 regular hours produces a hypothetical ratio, not an observed BLS rate. A valid conversion needs a matching total-hours or regular-hours denominator for the same employees and reporting period.

Keep the monthly all-employee series separate

FRED series CES3000000004 reports 3.1 average weekly overtime hours for all manufacturing employees in October 2026, seasonally adjusted. The data comes from the BLS Current Employment Statistics survey. Use that definition when deciding what belongs beside it in a trend chart.

Compared with the 2025 BLS table, this FRED observation covers a different employee population, measures a month rather than a year, and uses different seasonal treatment. The gap between 3.8 and 3.1 therefore does not establish that overtime fell. To assess a trend, compare observations from a consistently defined series.

How can you tell whether an overtime benchmark is comparable?

Check six things before calling a benchmark like-for-like: metric, denominator, employee population, industry, reporting period, and seasonal adjustment. If any differs, label the comparison as context rather than a direct benchmark. Do this before interpreting the gap as evidence that you need more people or have too many.

  1. Check the metric. Establish whether the figure measures weekly hours, an hours percentage, all overtime wages, or only the incremental premium. Hours show time worked; dollars show cost. Do not substitute one for the other.
  2. Check the denominator. Total worked hours, regular worked hours, gross wages, and broader compensation produce different results. Put the formula beside the number so the next person can reproduce it.
  3. Check the employee population. Production and nonsupervisory employees are not the same group as all employees. State which workers your plant calculation includes before comparing it with either series.
  4. Check the industry. Use the closest manufacturing subsector available. A maintenance department and an entire transportation-equipment plant are different comparison groups, even when both report overtime.
  5. Check the period. Compare annual results with annual results and similar operating periods with each other. A peak production month needs qualification when shown against an annual average.
  6. Check seasonal adjustment. Keep seasonally adjusted and unadjusted observations separate. Their difference is not evidence of an operating improvement.

Keep these definitions beside the result in your operational KPI reporting. Do not rely on the presenter to explain them every time. A percentage can stay in a recurring presentation long after the team has forgotten which employees or hours it includes.

Keep maintenance targets and supplemental pay out of the plant-wide table

Reliable reports a historical maintenance overtime target below 5% of regular maintenance hours and attributes it to federal guidance. The guide does not document how that target was measured. Because the secondhand account does not establish the underlying guidance or methodology, treat the figure as a qualified maintenance-specific reference, not a national manufacturing standard.

Reliable also states that the BLS material it examines provides no separate national maintenance-crew overtime estimate. A maintenance target is not a substitute for a plant-wide average covering production and other functions. The same discipline applies to pay: supplemental pay is broader than overtime, and the compensation table Reliable discusses does not isolate manufacturing overtime pay. Do not rename that share “overtime cost.”

How do you build an internal baseline without a matching external benchmark?

Build from reconciled hours and wage records across completed reporting periods. Keep definitions consistent, separate departments and shifts, and distinguish planned overtime from unplanned coverage. Then review the results against workload. You are establishing an operating reference for your own plant, not creating an externally validated manufacturing target.

  1. Choose the population and reporting window. Use completed payroll periods, name the included employees, and document scope changes. Include ordinary operations and known demand peaks. Selecting only a convenient month gives you a convenient answer, not a useful baseline.
  2. Reconcile the inputs. Tie regular and overtime hours to time records and wage totals to payroll. Keep hours-based calculations separate from dollar-based calculations, even when operations and finance review them on the same report.
  3. Segment before interpreting. Calculate results by department and shift. Define planned and unplanned overtime in writing, then record the reason for the hours, such as a scheduled production push or absence coverage.
  4. Calculate from totals. Divide summed overtime hours by summed total worked hours. Do not simply average department percentages when departments differ in size. Weight those percentages by their corresponding denominators instead.
  5. Assign owners to explain changes. Operations explains workload, HR supplies staffing and absence context, and finance reconciles the cost measure. Record the explanation and agreed action. A color-coded percentage without an owner does not resolve the staffing decision.

Repeated absence coverage calls for a review of your employee absenteeism rate alongside overtime, not an assumption that demand rose. If planned overtime accounts for most of the hours, check the production plan instead. These steps help explain the result; they do not prove that a particular percentage is healthy or unhealthy.

When should persistent overtime trigger a staffing review?

Review staffing when the same work repeatedly exceeds available regular-hour capacity, not simply when your percentage crosses a national average. Establish how long the workload will last, where the overtime occurs, and what alternatives would cost. Federal Reserve research supports using overtime as a demand-sensitive signal, not a fixed staffing threshold.

The Federal Reserve's 2019 analysis explains that firms typically adjust employee hours before changing employment. It also finds overtime particularly responsive to business-cycle fluctuations. An isolated high reading is therefore an incomplete hiring case. Find out whether the work is temporary, recurring, or concentrated in a skill or shift that added headcount would actually cover.

  • For a temporary demand peak, compare its expected duration with the cost and timing of adding capacity.
  • For recurring coverage gaps, examine staffing availability, absence patterns, and the roles carrying the extra hours.
  • For concentrated maintenance overtime, review the work orders and causes separately from production overtime.
  • For a hiring decision, compare expected workload with wages, benefits, recruiting, training, and the time before added capacity becomes productive.

Use an overtime approval process for hourly employees to capture planned demand and exceptions before the next reporting review. Each decision should identify the work, the responsible manager, and the reason for the additional hours. That gives the review something more useful than a payroll total to investigate.

The Department of Labor's Fact Sheet #23, as summarized by Reliable, states that covered, nonexempt employees generally must receive at least one and one-half times their regular rate for hours worked beyond 40 in a workweek under the Fair Labor Standards Act. That is a federal pay requirement. It does not set a recommended overtime percentage or tell you how much overtime your operating model should require. Assess compliance and staffing as separate questions.

How Cogniver helps manufacturing teams manage attendance and approvals

Cogniver keeps working hours, holidays, leave types, and balances in one organization-level attendance policy. Geofenced check-in verifies that employees are physically on site, and attendance exceptions use the same approval engine as other requests. HR and operations manage the policy and the requests it generates inside one workspace.

Build approval paths visually with branches, merges, and multistep approval chains. Require supporting documents before a request proceeds, or ask an approver to enter a verified value that controls later routing. The AI Router sends each request down exactly one branch using exact amount rules or a human-written policy. A mandatory default branch keeps requests moving when another path is needed.

Each workflow has its own isolated AI agent to answer questions, route requests, and chase approvers. Organization admins train it on that workflow's rules and configuration; conversation memory stays separate from other workflows and companies. Let the agent handle routine follow-up. Managers can spend their attention on whether the requested work justifies the staffing decision.

Frequently asked questions

What is a good overtime percentage for a manufacturing plant?

The cited national statistics do not establish a universal target. BLS reports weekly overtime hours, not a recommended percentage. Define your metric, choose the closest employee population and manufacturing subsector, and assess your plant's result against workload and staffing economics.

How do you calculate manufacturing overtime hours percentage?

Divide overtime hours by total hours worked for the same employees and period, then multiply by 100. Using regular hours as the denominator produces a different measure: overtime relative to regular-hour capacity.

Should overtime cost percentage include all overtime wages or only the premium?

Both measures are useful if labeled precisely. All overtime wages measure pay for overtime work. The incremental premium measures only pay above straight time. State which measure you use, name the payroll denominator, and keep both consistent.

Can BLS average weekly overtime hours be converted directly into a percentage?

No. A valid conversion needs a matching hours denominator for the same employee population and period. Assuming 40 regular hours creates an illustrative calculation, not an observed national overtime percentage.

Why do annual BLS figures differ from the monthly FRED series?

The 2025 BLS industry comparison covers production and nonsupervisory employees and is not seasonally adjusted. The October 2026 FRED observation covers all manufacturing employees and is seasonally adjusted. Those differences in population, period, and adjustment prevent a direct trend comparison.

You made it to the end
Up next

How to Aggregate KPI Percentages Without Distorting Results

Aggregate comparable departmental KPI percentages by adding their numerators and denominators, then dividing the totals. Weight by the denominator to measure overall activity; weight departments equally only when you want the average department's rate.

Keep scrolling to continue reading

Keep reading